Safety Training
Safety Training for 2025 is here!
Please take a look below at the course offerings that the Environmental Health and Safety department will be hosting.
Each session's location will be listed along with the time.
A few of these classes (CPR) have limits on the class size and will be handled in a "first come, first serve" basis. Other courses may have a "need" based requirement.
Please email EHS@coloradocollege.edu or lscott@coloradocollege.edu (x6678) if you have any questions or have problems with the signup form.
Sign Up
Session Descriptions
Golf Cart and LSV Safety
Dates: As required
Location: Bridge
Courses Covered
- Golf Cart and LSV Safety
THIS COURSE IS REQUIRED IF YOU WILL BE DRIVING A GOLF CART ON THE CC CAMPUS.
*NOTE:You will need to log into Bridge to view this course.
Please sign up using the form below to be added to the training.
Forklift Classroom Training
Dates: TBA
Time: 9 a.m. - 10:30 a.m.
Location: TBA
Courses Covered
- Forklift Classroom training (required as a prerequisite for the Forklift Hands-On training)
*Note: This course must be pre-approved by Facilities Management
Confined Space Entry
Dates: TBA
Time: 9 a.m. - 11 p.m. (noon)
Location: TBA
Courses Covered
- Confined Space Entry, Permitting and Safety Precautions
*Note: This course must be pre-approved by Facilities Management
Forklift Hands-On Training
Dates: TBA
Time: 8 a.m. - 12 p.m. (noon)
Location: Creekside (228 W. San Miguel St.)
Courses Covered
- Certification to drive Forklift, Aerial Manlift, Boom Lift and / or Boom Truck (manager approval required)
*Note: This course must be pre-approved by Facilities Management
CPR, First Aid, AED with Bloodborne Pathogens
Dates: May 21, 2025
May 28th, 2025
Time: 9 a.m. - 3 p.m.
Location(s):FAC 256
Courses Covered
- CPR, First Aid, AED (Adult and Pediatric)
- Bloodborne Pathogens
- Anaphylaxis and Epinephrine
- Nalaxone Administration (Opiod Overdose)
*NOTE: These courses will be capped at 12 people (min 2) due to licensing requirements with the Red Cross. Additional dates will be added if participation levels allow. This class is a HYBRID format requiring 4 - 6 hours of online coursework to be completed prior to the skill verification.
Respiratory Protection and Fit testing
Dates: TBD
Time: 9:00 a.m. - 11:00 a.m.
Location:
Courses Covered
- Respiratory Training/Exam/Fit Testing, 2 hours
*NOTE: A respirator is needed to participate in this course. Contact EHS to discuss Respirator procurement. Participants must pass a doctor evaluation or provide documentation showing elgibility. Participants should have a “need” based on their role with the College. Please contact EHS prior to enrolling in this course.
Lockout Tagout
Dates: TBA
Time: 9:00 a.m. - 10:30 a.m.
Location: TBD
Courses Covered
- Lockout Tagout
*Note: This course must be pre-approved by Facilities Management
OSHA 30 - Hour Outreach
Dates: TBA (This course will run multiple days)
Time: 10 Days
- Day 1 - 3 Hours: 9AM - 12PM
- November 4 or November 5
- Day 2 - 3 Hours: 9AM - 12PM
- November 7 or November 8
- Day 3 - 3 Hours: 9AM - 11AM
- November 11 or November 12
- Day 4 - 3 Hours: 9AM - 11AM
- November 14 or November 15
- Day 5 - 3 Hours: 9AM - 12PM
- November 18 or November 19
- Day 6 - 3 Hours: 9AM - 12PM
- November 21 or November 22
- Day 7 - 3 Hours: 9AM - 11AM
- December 2 or December 3
- Day 8 - 3 Hours: 9AM - 11AM
- December 5 or December 6
- Day 9 - 3 Hours: 9AM - 12PM
- December 9 or December 10
- Day 10 - 3 Hours: 9AM - 12PM
- December 12 or December 13
Location: TBD
Courses Covered
- Mandatory - 12 Hours
- Introduction to OSHA - 1 Hour
- Managing Safety and Health - 2 hours
- Walking and working Surfaces with Fall Protection - 1 Hour
- Emergency Action Plan, Fire Protection - 2 Hour
- Electrical Safety - 2 Hour
- Personal Protective Equipment - 1 Hour
- Materials Handling - 2 Hours
- Hazard Communication - 1 Hour
- Elective - 10 Hours
- Bloodborne Pathogens - 1.5 Hours
- Machine Guarding - 1 Hour
- Lockout / Tagout - 2 Hours
- Powered Industrial Vehicles - 1.5 Hours (Does not include Hands-On)
- Permit-Required Confined Spaces - 2 Hours
- Ergonomics - 1 Hour
- Introduction to Industrial Hygeine - 1 Hour
- Optional - 8 Hours
- Asbestos - 2 Hours
- Respiratory Protection - 2 Hours
- Lead - 2 Hours
- Silca - 2 Hours
The OSHA 30 Hour Outreach is intended to provide general industry workers information on how to avoid and prevent workplace injuries. Space is limited to 20 persons per class and will be on a first come first served basis.
Time requirements are for 30-Hours of classroom instruction, to minimize scheduling issues this training will be broken into 10 blocks on 10 seperate days. Please make sure to attend ALL TEN (10) classes to receive credit for the course.
Upon completion, participants will receive an OSHA 30 - Hour card.